3M 5952 VHB Double Sided Tape 1in x 9ft

3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner. 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is ideal for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners. Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape. Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner). Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter.

• 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner.
• 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is ideal for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners.
• Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape.
• Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner).
• Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter.